Resources

Programmer Download Station

PC programs, manuals and setup files for Hitec programmers and chargers.

Jump to
HPP-21 / HPP-21 PLUSHPP-22H4DPC-10DPC-CAN
Firmware updates are delivered automatically. When your PC is connected to the internet, the HPP-22 PC program checks this server for the latest firmware and version information. Install the PC program below, then follow the instruction manual.
HPP-21 / HPP-21 PLUSServo Programmer

PC Programmer for Hitec Digital Servos

Program and test digital servos of all brands from your PC. HPP-21 PLUS adds field programming without a PC.

Features

  • USB interface, easy programming with the PC program
  • Firmware upgradable
  • Field programming without PC*
  • Button operation with vivid LED display*
  • Servo parameter save / load*
  • 4.8V battery and USB cable required (not included)

Programming Functions

  • Servo test (manual / auto)
  • EPA / Fail-safe position, fail-safe on/off
  • Servo speed, change rotation (CW / CCW)
  • Dead band setting, overload protection
  • Resolution mode setting (HS-7XXX)
  • Servo reset
* Available with HPP-21 PLUS only.
Downloads
EXE
PC Program Install File
1.9 MB · v1.00005
 PDF
HPP-21 & PLUS Manual
1.1 MB
HPP-22Radio Programmer

PC Programmer for Hitec Transmitters & Receivers

USB plug & play interface for firmware upgrade, data setting and data backup of Hitec radios, modules and receivers.

Features

  • USB interface, plug & play (no battery required)
  • Easy operation with PC program
  • PC interface for Hitec 2.4GHz telemetry system

Functions

  • Radio, module and receiver firmware upgrade
  • Data setting, save & load to PC, data reset
  • Automatic version check

Applicable Models

  • RX: HSD-09RQ (FREEDOM9S), OPTIMA 7 / 9
  • TX: OPTIC 6 SPORT, AURORA 9
  • TX module: SPECTRA 2.4
Downloads
EXE
HPP-22 PC Program Install File
16.6 MB · v1.19
 PDF
HPP-22 Manual
1.2 MB
 PDF
HTS-NAVI Manual (English)
0.8 MB
H4Smart Charger

H4 Smart Charger PC Program

Manage the H4 Smart Charger from your PC. Firmware can be upgraded with the HPP-22.

Features

  • Charges NiMH, NiCd, Pb and Li-xx batteries (auto detecting)
  • Ni-xx cycle charge & discharge (up to 10 cycles)
  • Built-in cell check (voltage level & capacity)
  • Channel Bridge: two channels combined into one
  • User name (12 characters), temperature sensor support

Required Components

  • Microsoft .NET Framework 4.0
  • Visual Basic Power Packs
  • Install both before the H4 PC program if not already installed
Downloads
EXE
H4 PC Program Setup
0.8 MB · 2013-04-01
 PDF
H4 PC Program Manual (English)
0.7 MB
 PDF
H4 Manual v1.02
0.6 MB
 EXE
.NET Framework 4.0 (x86 / x64)
48.6 MB
 EXE
Visual Basic Power Packs
0.4 MB

Need help with installation? Contact us or browse the Download Center for datasheets and manuals.