With 100mm of travel and a 100:1 gear ratio, the HLS12-100100 is ideal for short stroke applications requiring a faster transit speed with more power.
Controlled using a traditional PWM servo signal, Hitec linear actuators provide optimized motion control for precise and powerful positioning. Whether your application demands a low-profile form factor, or extended linear throws, we have an actuator to suit your needs. Our linear actuators are popular for a myriad of uses including robotics and animatronics, as well as industrial mechanical applications. Programmable stroke and speed settings, power-off position stability, and a variety of mounting options, provide additional functionality and flexibility. Additionally, Hitec linear actuators provide full excursion using a 1050 - 1950µs input range. This feature allows fully compatible use with all radios, by eliminating the requirement for programming extended rates to achieve full motion.
The HLS12-10050 offers more speed, while additional thrust is available with the high gear ratios of our HLS12-100210 and HLS12-100380 versions.
Applications requiring less excursion will be better matched to our HLS12-30XX and HLS12-50XX series linear actuators.
General Specifications
|
HLS12-100100-6V Linear servo - Lead 5mm |
|
|---|---|
| Control System | PWM |
| Operating Voltage | 4.0v ~ 8.4V |
| Motor Type | Cored Metal Brush |
| Controller (MCU) | 32bit Programmable Digital |
| Lead Screw | LEAD 5mm |
| Gear Ratio | 100 : 1 |
| at 4.8V | |
| No Load | Speed : 10.4mm/s Current : 80mA |
| Maximum Efficiency Point | Load : 1.4kgf (13.34N) Speed : 8.24mm/s Current : 160mA |
| Peak Power Point | Load : 2.5kgf (24.32N) Speed : 5.6mm/s Current : 240mA |
| Max Thrust (Lifted) | Load : 3.4kgf (32.95N) Speed : 2.56 mm/s Current : 320 mA |
| Stall Thrust | 4.0kgf (39.23N) |
| Stall Current |
400 mA |
| Max Static Thrust | 16.32kgf (160N) above |
| at 6.0V | |
| No Load | Speed : 13.0mm/s Current : 100mA |
| Maximum Efficiency Point | Load : 1.7kgf (16.67N) Speed : 10.3mm/s Current : 200mA |
| Peak Power Point | Load : 3.1kgf (30.40N) Speed : 7.0mm/s Current : 300mA |
| Max Thrust (Lifted) | Load : 4.2kgf (41.19N) Speed : 3.2mm/s Current : 400mA |
| Stall Thrust | 5.0kgf (49.03N) |
| Stall Current |
500 mA |
| Max Static Thrust | 20.39kgf (200N) above |
| at 7.4V | |
| No Load | Speed : 16.1mm/s Current : 130mA |
| Maximum Efficiency Point | Load : 2.1kgf (20.59N) Speed : 12.72mm/s Current : 250mA |
| Peak Power Point | Load : 3.8kgf (37.54N) Speed : 8.65mm/s Current : 370mA |
| Max Thrust (Lifted) | Load : 5.2kgf (50.87N) Speed : 3.95mm/s Current : 490 mA |
| Stall Thrust | 6.2kgf (60.56N) |
| Stall Current |
620 mA |
| Max Static Thrust | 25.19kgf (247N) above |
| Mechanical | |
| Stroke Spec | 100mm |
| Repeatability | ± 0.5mm |
| Max Side Load (Extended) | 1.53kgf (15N) |
| Weight | 56g (1.975oz) |
| Outline Dimensions | 152.0 x 15.0 x 18.0mm (5.984 x 0.591 x 0.709inch) |
| Operating Temperature Range | -10°C ~ +50°C (+14°F ~ +122°F) |
| Storage Temperature Range | -30°C ~ +80°C (-22°F ~ +176°F) |
| Connector Wire Length | 160mm (6.294inch) |
| Bearing Type | Flange Bearing |
| Case Material | Engineering Plastic & Aluminum Pipe |
| Gear Material | 4 Metal Gears |